● Built-in RSSI PWM output(0-3.3V)
● Built-in battery voltage detection
● Built-in 3-axis gyroscope and 3-axis accelerometer sensor module
● Smart Port enabled
● SBUS Port enabled
FrSky S8R Receiver 2.4GHz ACCST w/ 3-Axis Stabilization
The S8R is a FrSky X-series receiver with built in 3-axis stabilization. For conventional Fixed Wing and Glider Models it will support stabilization, automatic level, hover and Knife-edge flight modes, for Delta Wings or flying wings and V-tail models it supports stabilization and automatic level flight modes. You can edit...
The S8R is a FrSky X-series receiver with built in 3-axis stabilization. For conventional Fixed Wing and Glider Models it will support stabilization, automatic level, hover and Knife-edge flight modes, for Delta Wings or flying wings and V-tail models it supports stabilization and automatic level flight modes. You can edit the type of model and manipulate all these features via the S8R.Config or S8R.lua. The S8R can also be used as a standard 8 channel X series receiver if it is required.
FEATURES
SPECIFICATIONS
| Compatibility | FrSky Taranis X9D Plus/X9E/X7/Horus X12S/XJT in D16 mode S8R-EU only works with FrSky Taranis X9D Plus/X9E/X7/Horus X12S/XJT in D16-EU mode |
| Firmware Upgradable | Firmware Upgradeable |
| Dimension | 46.47×26.78×14.12 mm (L×W×H) |
| Weight | 14g |
| Operating Range | Full range |
| Operating Voltage Range | 4.0-10V |
| Operating Current | 120mA@5V |
| Number of Channels | 8/16CH (1-8ch from conventional channel outputs, 1-16ch from SBUS output) |
| RSSI（Y/N） | With RSSI PWM output on board: PWM voltage output (0-3.3V), 100Hz, 1500±500us |
| Measurement Range | Gyroscope Measurement Range: ±2000dps Accelerometer Measurement Range: ±4g |